1.Double click “My device”, then open “Windows” folder.
2.Double click to start this software :ModulePowerCtrl.
3.Click “WIFI” button to turn it on.
4.Go back to desktop, click Cross to set WIFI.

Please refer to”attach file”as below

1.Device bluetooth connecting.
2.Software connecting.

1.Set paramaters with total station.
2.Device connect with total station.
3.Do survey work and collect the point on the device.
More detailed operation refer to relevant file.

Please refer to the video (https://youtu.be/dtI8igIIn0Q).

1.Open the Hi-GNSS software,double click “GPS-Off Line” to connect to the GPS.
2.Set rover parameters(Mark “Send Rover Position to Network”).
3.Click “POS”,and click arrow to do the NMEA setting.
4.Set the parameters(Interval).

1.Set V30 as rover and get corrections from base and get fixed solution, then go to the “Log row GPS” interface.
2.Creat a new static data file and set the corresponding parameters and confirm it.
3.Go to store points in RTK mode.

1.Set up base,collect static data.
2.Start up another receiver, waiting until tracked satellite, then do stop-go.
3.Collect static data through receiver panel or software.

Please refer to the bellow file

1.Calibrate electronic bubble. (Connect V90 Plus in Hi-Survey Road software,then find Electronic bubble calibration in “Others” to do the calibrate).
2.Calibrate direction sensor.
3.Calibrate attitude deviation.
3.Do survey.(Auto collecting by “bubble is center”).

Please refer to the bellow file.

1.Check the Antenna measurement explanation.
2.In “Set rover antenna” interface, chose the right antenna take position.