1.Check the Antenna measurement explanation. 2.In "Set rover antenna" interface, chose the right antenna take position.
1.Set rover via Hi-RTK software,change Sky BuateRate（Linkrate）to 9600. 2.Change external radio Sky BauteRate.(Please refer to the bellow file).
1.Make sure the registration code is not invalid. 2.Check whether base position coordinate and the parameters are correct or not.…
1.Turn on V30. Upgrade V30 firmware to 4.8version. Super long pressing F1 to reset motherboard. 2.Connect V30 with PC by…
1.Open the HGO software to found new project and input the project info.Then define the coordinate system. 2.Click【Import Files】, import…
1.Transform Two Static Files( Rover and Base ) into Rinex. 2.Process the Transformed two static Rinex Files by HD2003 sofyware.…
1.Connect PDA to V30 through Bluetooth; Pass code: 1234.Then set the com port. 2.Start Hi-GNSS, choose the port, connect to…
1.Put in a SIM card both base and rover. 2.Open the GNSS Receiver Management Software to connect the V30. 3.Set…
1.Connect the V60 by USB port. 2.Copy the firmware software file to the"update disk". 3.Then reboot the V60 and you…
1.Remove the battery and then replace it. 2.Press the up arrow key and the Action key, and while two keys…
1.Prepare a formatted TF card and copy the firmware to it. 2.Install the SD card into QminiMP and put in…
Notice: The update operation only can be done in WindowsXP system. 1.Install the drivers. 2.Open the "MH ROM Update Utility"…
1.Power off the decice and long press both power and vol+ keys to enter recovery mode. 2.Press the photo key…
1.Device Bluetooth connecting Start controller, connect GPS through Bluetooth.Click Add new device, search for Bluetooth device.Choose the number of the…
1.Open the Hi-RTK software. 2.Get into the " GPS " software. 3.Connect the GNSS Receiver and click register. 4.Import the…
Please refer to the bellow file
This website uses cookies.