1.Run Dial-Helper software,import a name in EntryName and new a connection. 2.Click “Set” button to set the parameters.If your country…
1.Open the software, click Setting. Choose or input the corresponding parameters in Ellipsoid and Projection. 2.Click System and choose Coordinate…
1.The RSP file is saved at the SurvCE installation covered directory. 2.Connect your handheld device to PC. 3.Program Files->SurvCE->Data,and you…
1.Download the .apk from our website ,then connect the Android (4.0 or higher) device to the computer and turn on…
1.Double click the XT9 program and install it on Getac.Then you will see the bottom icon when entering. 2.if you…
1.Open Hi-Net Server:Tools->Data Export,as figure1 shows. 2.Choose“Add”and find the data project that from Hi-Q saved.And then choose the .prj file,as…
1.Double click "My device", then open "Windows" folder. 2.Double click to start this software :ModulePowerCtrl. 3.Click "WIFI" button to turn…
1.Device bluetooth connecting. 2.Software connecting.
1.Set paramaters with total station. 2.Device connect with total station. 3.Do survey work and collect the point on the device.…
Please refer to the video (https://youtu.be/dtI8igIIn0Q).
1.Open the Hi-GNSS software,double click "GPS-Off Line" to connect to the GPS.2.Set rover parameters(Mark "Send Rover Position to Network").3.Click "POS",and…
1.Set V30 as rover and get corrections from base and get fixed solution, then go to the "Log row GPS"…
1.Set up base,collect static data.2.Start up another receiver, waiting until tracked satellite, then do stop-go.3.Collect static data through receiver panel…
1.Calibrate electronic bubble. (Connect V90 Plus in Hi-Survey Road software,then find Electronic bubble calibration in "Others" to do the calibrate).…
Please refer to the bellow file.
1.Check the Antenna measurement explanation. 2.In "Set rover antenna" interface, chose the right antenna take position.
1.Set rover via Hi-RTK software,change Sky BuateRate（Linkrate）to 9600. 2.Change external radio Sky BauteRate.(Please refer to the bellow file).
1.Make sure the registration code is not invalid. 2.Check whether base position coordinate and the parameters are correct or not.…
This website uses cookies.