1.New a project and input the project info. 2.Define the coordinate system. 3.Click【Import Files】, import the observe file. 4.Add station…
1.Copy the grid file to the “GEOpath” (File format “.GRD”). 2.Open Hi-RTK and click "Setting" to get into interface. 3.Click…
1.Run the Hi-RTK and open a project. 2.Go to the Setting interface. 3.Set the parameters according to your own coordinate…
1.Open the properties of serial port. 2.Turn into port setting and enter into [advanced]. 3.Change the serial port.
there are several procedures to do in summary. 1.take a picture of the current condition of the instrument in case…
1.Setting on the total station. 2.Using the Hyper Terminal and connect total station, if there is no this software please…
1.Open the"PC-IO Data software" ->".MEA file" 2.Output the" .MEA file" 3.Choose the out put coordinate format (Must remember the format…
1.Open Total Station data transfer software. 2.Choose Coo file in the red frame, then click"import"to import the Coo file you…
1.Copy the shortcut icon of Hi-Q:Long press the "Hi-Q"->click "Copy".As figure 1 shows. 2.Click the place as figure 2 shows.Choose:My…
1.Open your progect(here use 33 file for example)->Import background. 2.Find your ZMP ->click "OK".
1.Choose "Geoference Image"->File->Create ZMP file. 2.Choose the picture that wanted(support bmp,jpg,tif.png,gif format). 3.Choose the coordinate type and click "Next" 4.Set…
1.Open"My device""->"control panel"->"stylus"->"calibration". 2.You will get the figure below.Follow the cross-shaped flag to complete the calibration. 3.After finish the calibration…
1.Setting Base,click"Enable Glonass"option in tab"Difference". 2.Setting Rover,click the same options. 3.In the Satellite View Page, Click"GLONASS"to see the satellites.
1.Download Hi-RTK from Hi-Target CD or Hi-Target website. 2.Install ActiveSync software(xp) or WindowsMobile Device Center(win7). 3.Connection,use USB cable to connect…
1.Open the Hi-RTK software. 2.Click"Survey"to go to the interface. 3.Select the "Stored point" list. 4.Click the last tools at the…
Please configure it refer to the manual as belew.
To upgrade the firmware of VNet6,please refer to the manual as below.
MMS (Mobile Mapping System) is one of the latest surveying technology to measure the object by millions of points per…
We have collected abundant data resulted from the operation and proved that Hi-Target is an advanced technology company in 3D…
This website uses cookies.